Concrete Foundations & Footings

Why Foundations Matter

Your foundation is the most important part of any structure. It supports the entire weight of the building, transfers that load to the ground, and keeps everything level and stable. If the foundation fails, everything else fails too. That is why getting it right from the start is so critical.

Here in Maricopa, the soil conditions add extra challenges. We deal with expansive clay soil that swells when it gets wet and shrinks when it dries out. This movement can crack foundations if they are not designed and installed correctly. We have been pouring foundations in Maricopa for years, so we know how to work with the local soil and build foundations that stay stable.

Whether you are building a new home, adding a room addition, putting up a garage, or constructing a shed or outbuilding, we make sure your foundation is built to last. We follow local building codes, work with your engineer or architect, and handle all the details so you get a foundation you can trust.

Types of Foundations We Build

Different structures need different types of foundations. Here are the most common ones we install in Maricopa:

• Slab foundations: A single, thick concrete slab poured directly on the ground. Common for homes, garages, and commercial buildings. Cost-effective and works well in our climate.
• Stem wall foundations: A concrete footing and wall that creates a raised platform for the structure. Provides better drainage and ventilation. Often used for homes in areas with drainage concerns.
• Strip footings: Continuous concrete strips that support load-bearing walls. Used for additions, garages, and smaller structures.
• Pier and grade beam foundations: Concrete piers drilled deep into the ground with beams connecting them. Best for areas with unstable or expansive soil.
• Isolated footings: Individual pads that support columns or posts. Common for decks, pergolas, and shade structures.

We will work with your builder, engineer, or architect to determine which type of foundation works best for your project. If you are not sure what you need, we can explain your options and help you make the right choice.

How We Install Foundations

Foundation work requires precision and attention to detail. Here is how we approach every foundation project:

Site Evaluation and Soil Testing

Before we pour anything, we need to understand the soil conditions. If required, we work with a soil engineer to test the ground and determine the bearing capacity. This tells us how much weight the soil can support and whether we need to take extra steps like over-excavation or soil stabilization.

Excavation and Grading

We excavate to the depth specified in your plans, making sure the bottom of the excavation is level and compacted. If we hit soft or unstable soil, we remove it and replace it with engineered fill. Getting the grade right from the start prevents settling and foundation movement later.

Reinforcement and Forms

We install rebar according to your engineer's specifications. Proper reinforcement is what holds the concrete together and gives the foundation its strength. We also set forms to the exact dimensions and elevations shown on your plans. Everything needs to be square, level, and precisely placed.

Pour and Finish

We pour the concrete in one continuous pour to avoid cold joints and weak spots. We vibrate the concrete to remove air pockets and make sure it fills every corner of the form. Then we finish the top surface smooth and level. After the pour, we cure the concrete properly so it reaches full strength before any load is applied.

Working with Local Building Codes

Foundation work in Maricopa requires permits and inspections. We handle all the coordination with the building department, schedule inspections, and make sure everything meets code requirements. You do not have to worry about the paperwork or dealing with inspectors. We take care of it.

We also work closely with your engineer, architect, or contractor to make sure the foundation matches your plans. If there are any issues or changes needed, we communicate clearly and get them resolved quickly. Our goal is to keep your project moving forward without delays or surprises.

When you work with CityView Maricopa Concrete, you get a team that knows the local codes, understands the soil conditions, and has the experience to do the job right. We do not cut corners or rush through foundation work because we know how important it is.

Frequently Asked Questions